When bedding is used for a long time, it is inevitable that some odor will occur, especially the mattress, which is the most likely place to produce odor. What should I do if I encounter a simmons mattress with a peculiar smell? Want to know some effective ways to remove mattress odor? Today, the editor will take you through some tips on how to remove odor from Simmons mattresses!
1. How to remove odor from Simmons mattress
1. Ventilate and remove odor
Generally purchased new You can first remove the outer plastic protective film of the mattress and place it outdoors to ventilate and disperse the smell. This method is suitable for situations where the smell of the mattress is not very pungent. During the mattress manufacturing process, the smell caused by the processing technology is normal. It only needs to be stored for about a month, and the smell will disappear naturally.
What should I do if my Simmons mattress has an odor?
2. Bamboo charcoal adsorption and deodorization
Many families choose bamboo charcoal to absorb formaldehyde and odors. Bamboo charcoal has super adsorption capacity and the ability to radiate far-infrared rays. It can absorb moisture, odors and harmful gases, keeping indoor air fresh and beds dry.
3. Activated carbon adsorption and deodorization
Placing activated carbon indoors to absorb mattress odor and formaldehyde is also a more reliable method. Activated carbon has a relatively strong physical adsorption capacity. After about a month, the odor of the mattress will be reduced.
4. Place green plants
Some green plants not only have a good decorative effect, but can also absorb harmful substances such as formaldehyde and benzene. This green plant is also a good and economical way to absorb formaldehyde.
Simmons mattress
2. Simmons mattress purchasing tips
1. Look at the brand and craftsmanship
There are three types of Simmons on the market today: machine-made and hand-made or partially hand-made. Generally, the quality of products produced using modern equipment is more guaranteed and can be purchased as an optional product. In addition to looking at the brand, also look at its quality. From the outside to the inside, first look at the surface craftsmanship of the mattress, and then look at whether the quilting is fine and without skipping stitches, the surroundings are straight and not rough, the thickness of 20 cm is very uniform, and the width is from 90 cm (single bed) to 150 cm Are the specifications of each level (double bed) accurate?
2. Look at the bones and structure
Put the flat Simmons mattress upright to see if it is out of shape. Simmons products with tight springs, thick padding such as foam sponges, and scientific structures will still be flat, crisp, and angular after being erected; while Simmons products with loose springs, uneven padding, and insufficient filling will immediately lose shape once they are erected, or Unable to straighten or bend down, or there is a bump in the middle.
Simmons mattress purchasing tips
3. Check the filler, check Spring
Four-sided press Check to see if the filler feels thick and even; press it hard, and if there is no big spring friction sound when pressing it, it is a machine-made spring, and the arrangement is tight and reasonable; on the contrary, if there is a loud spring friction sound when pressing it, it is mostly a machine-made spring. Hand-made springs have unstable quality.
The above is how the editor shared with you how to remove the odor from Simmons mattresses. I hope it will be helpful to you. If you want to know more about Simmons mattresses, please continue to pay attention. Get a quotation in 10 seconds and get four sets of design plans*, as well as full tracking service by a decoration butler, so hurry up!
