What are the benefits of linen yarn?

1. Cool. The heat dissipation performance of linen is 5 times that of wool and 19 times that of silk. In hot weather conditions, wearing linen clothing can make people’s skin surfaceThe surface temperature is 3-4 degrees Celsius lower than when wearing silk and cotton clothing.

2. Dry. Linen can absorb 20% of its own weight in moisture and quickly release the absorbed moisture, keeping you dry no matter how much you sweat.

3. Reduce perspiration. Helps maintain body electrolyte balance. Studies have shown that linen clothing can reduce human perspiration by 1.5 times compared to wearing cotton clothing.

4. Radiation protection. Wearing a pair of linen pants can greatly reduce the effects of radiation, such as radiation-induced decreases in sperm count in men.

5. Anti-static. Blended fabrics containing only 10% linen are enough to provide anti-static properties. It can effectively reduce the restlessness, headache, chest tightness and dyspnea caused by static electricity environment.

6. Inhibit bacteria. Flax has a good inhibitory effect on bacteria and fungi and can effectively prevent some diseases. According to research by Japanese researchers, linen sheets can prevent bedsores in long-term bedridden patients, and linen clothing can help prevent and treat certain skin conditions, such as common rashes and chronic eczema.

Flax is also called flax and flax. There are three categories: fiber, oil, and fiber and oil. They are all annual herbs. Due to their good hygroscopicity, fast moisture conduction, and relatively thin diameter, they are one of the main fiber raw materials for spring and summer clothes. They are usually made of flax fiber. The resulting cloth is called linen fabric

Flax fiber exists in the phloem tissue of the hemp stem. It is soaked and degummed to remove part of the gum, so that the adherent fiber bundles are partially loosened, and then pressed and beaten into “beaten flax”, which is 10 to 20 fibers. Craft fibers composed of single fibers.

After the fiber is harvested from flax, it is bundled into small handfuls for retting and degumming. The water temperature of warm water retting should be controlled between 28 and 32°C. After about 100 hours, the hemp stalks are taken out, put into an umbrella shape, and dried in the open field.

Rain and dew retting is to lay the harvested hemp stems flat on the grass or flax On the ground, it is soaked by rain and dew, and fermented by mold. Under suitable humidity conditions, after 7 to 10 days, smash the retting stems, remove the xylem and impurities, comb the fibers, and then mark them by quality. The short flax that is knocked off is called the second coarse flax.

How to distinguish cotton and linen?

(1) Use light to check whether the thickness of the longitude and latitude lines is uniform. If the warp and weft lines are too even, it may be cotton fabric.

(2) Tighten the cloth pattern to check the density of the weave.

(3) High-quality primary color linen is brown, shiny, and absorbs water evenly. Linen is not of good quality and has been processed into soft fibers. It absorbs water unevenly and turns black when it gets wet.

(4) Worsted linen on the outside, the less plush on the surface, the better.

(5) The vertical and horizontal tightness of half linen is different.

(6) Pull a thread end, if there are bends and separations at both ends , the thread is cotton thread. The two ends of the torn linen thread should be smooth, otherwise they will be impure.

(7) If caustic soda water is applied to the canvas, the linen will appear brown , the cotton cloth is light yellow.

Lax is generally blended with cotton, viscose, polyester, acrylic, etc. It can also be blended with three Integrated blending, the main spinning processes include ring spinning, open-end spinning, and flax wet spinning. Only flax is wet-spun. Pure flax is divided into short linen and long linen. Long linen is more expensive, short linen is cheaper, and short linen is only It can spin thick yarn, but not fine yarn.

Use of linen yarn: Linen yarn is a yarn used for knitting and weaving. It can be used to make sweaters, circular knitting machines, casual wear, work clothes, clothing, hand knitting, etc. It is exported to make table mats, sofa fabrics, linen mats, and ordinary summer clothes. etc., because flax is the most flame-retardant of all textile fibers, fire hoses and fire-proof clothing are all made of flax. In foreign countries, hotels are decorated with linen.

Advantages of linen yarn: extremely high strength, moisture absorption, thermal conductivity, good air permeability, freshness, etc. Under normal humidity, it can be the temperature that the human body feels indoors A drop of 4-8℃ is called air conditioning

Disadvantages of linen yarn: wearing Not much, the appearance is rough.

What are the benefits of linen yarn?

1. Cool. The heat dissipation performance of linen is 5 times that of wool and 19 times that of silk. In hot weather conditions, wearing linen clothing can make the skin surface temperature 3-4 degrees Celsius lower than wearing silk and cotton clothing.

2. Dry. Linen can absorb 20% of its own weight in moisture and quickly release the absorbed moisture, keeping you dry no matter how much you sweat.

3. Reduce perspiration. Helps maintain body electrolyte balance. Research shows that linen clothing can…��The amount of sweat emitted by the human body is 1.5 times less than wearing cotton clothing.

4. Radiation protection. Wearing a pair of linen pants can greatly reduce the effects of radiation, such as radiation-induced decreases in sperm count in men.

Flax, also known as flax and flax, has three categories: fiber and oil, and fiber and oil. They are all annual herbaceous plants. Due to its good hygroscopicity, fast moisture conduction and relatively thin diameter, it is one of the main fiber raw materials for spring and summer clothes. Usually, cloth woven from flax fibers is called linen fabric.

Flax fiber exists in the phloem tissue of the hemp stem, and part of the gum is removed through retting and degumming. The adhered fiber bundles are partially loosened, and then rolled and beaten into “beaten”, which is a technical fiber composed of 10 to 20 single fibers.

After the fiber is harvested with flax, it is bundled into small handfuls for retting Hemp degumming. The water temperature of warm water retting should be controlled between 28 and 32°C. After about 100 hours, the hemp stalks are taken out, put into an umbrella shape, and dried in the open field.

Rain and dew retting is to lay the harvested hemp stems flat On grass or flax, it is soaked in rain and dew and fermented by mold. Under suitable humidity conditions, after 7 to 10 days, smash the retting stems, remove the xylem and impurities, comb the fibers, and then mark them by quality. The short flax that is knocked off is called the second coarse flax.

How to distinguish cotton and linen?

(1) Use light transmission to check whether the thickness of the warp and weft lines are uniform. If the warp and weft lines are too uniform, it may be cotton fabric.

(2) Tighten the cloth pattern to check the density of the weave.

(3) High-quality original color linen is brown and shiny , absorb water evenly. Linen is not of good quality and has been processed into soft fibers. It absorbs water unevenly and turns black when it gets wet.

(4) Worsted linen on the outside, plush surface Less is better.

(5) The vertical and horizontal tightness of half linen is different.

(6) Pull a thread, if there are bends at both ends And the phenomenon of hair separation, the thread is cotton thread. The two ends of the torn linen thread should be smooth, otherwise they will be impure.

(7) If caustic soda water is applied to the canvas, then the linen It will appear brownish-yellow, and cotton will appear light yellow.

<img dat