Buy Fabric Fabric News Continuous pad dyeing machine – fabric operation conditions

Continuous pad dyeing machine – fabric operation conditions



Continuous pad dyeing machine – fabric operation conditions ​ 1. The operation of continuous pad-dyed fabrics with insoluble azo dyes The dry fabric is introduced from the cl…

Continuous pad dyeing machine – fabric operation conditions

​ 1. The operation of continuous pad-dyed fabrics with insoluble azo dyes
The dry fabric is introduced from the cloth feeding rack into the three-roll padding car, and is dipped in the second-padding phenol primer. The fabric after priming enters the first row of infrared dryers for drying, and is ventilated through the ventilation guide roller for 10 seconds to quickly dissipate part of the humidity, and then enters the second row of infrared dryers for drying. At this time, the fabric is close to drying. Then it is dried in a single-column drying drum, and the ventilation guide roller is ventilated and cooled for 10 seconds to dissipate heat and reduce the temperature of the cloth surface, so as to avoid bringing more heat into the color developing tank, affecting the stability of the color developing solution and affecting the color development effect. After drying and ventilating, the fabric falls into the J-shaped stacking box and stays for 30 to 60 seconds. Then it is introduced into the three-roller color padding car, where it is padded (two dips and two pads or one dip and one pad) with the color developer, and the padding line pressure and The bottom rolling car is the same. After being ventilated by the guide roller for 10 to 20 seconds, it enters the steaming box for steaming for 60 to 105 seconds, and the steaming temperature is 98 to 100°C. The colored fabrics coming out of the steamer are washed in five compartments and steamed in three soap steamers, ventilated for 20 to 30 seconds, dried in a double-column drying drum, and then dropped into the stacking car from the drop rack.
2. The operation of the vat dye suspension continuous pad dyeing machine
The dry fabric after the warp yarn is introduced into the three-roll pad car, the two-dip and two-pad suspension dye liquor, and dried by two rows of infrared rays and a single column drying drum After drying in the dryer, it enters the reduction steamer for steam reduction, and then oxidizes after exiting the steamer. It is then washed flatly in ten grids, steamed and cleaned in a soap steamer. After drying in the double-column drying cylinder, it is dropped into the cloth drop device. Stacking cloth inside the car.
3. Fabric operation conditions of continuous pad dyeing machine with soluble vat dyes
The dry fabric is introduced from the cloth feed rack into the three-roller padding (two-dip and two-padding) dye solution, and then passes through two rows of infrared rays and a single-column drying cylinder The dryer is used for drying, and then the three-roll rolling car is used for two dips and two paddings in the developing liquid. The guide rollers are ventilated for 10 to 20 seconds, so that the oxidation of the developing dye liquor continues to occur, which is conducive to the full development of the dye. Then it is steamed in a reduction steamer, washed and cleaned with seven grids, steamed and cleaned in a soap steamer, dried in a double-column drying cylinder, and then dropped from the cloth drop rack into the stacker car.
4. Operation conditions of continuous pad-dyed fabrics with sulfur dyes
After the dry fabrics are transported to the three-roll pad car from the fabric feed frame, they are dipped in the second-pad sulfur dye solution and then enter a certain amount of vat dye solution for long evaporation. The box restores steam for 40 to 60 seconds, and the steaming temperature is 105 to 108°C. The steam box comes out of the two-roll rolling car and then enters the small steam box for steaming. It is washed with hot and cold water in a nine-compartment flat washing tank, dried by a double-column drying drum dryer, and then introduced into the stacking car from the cloth drop rack.
5. Operation status of continuous pad-dyed fabrics with reactive dyes
Pad-dying with reactive dyes is divided into one-bath method and two-bath method. When the one-bath pad dyeing method is used to dye reactive dyes, the fabric is pad-dyed, pre-baked by two rows of infrared rays and dried in a drying drum, then steamed or baked to fix the color, and then soaped and washed. When using the two-bath pad dyeing method, the fabric is first dipped in pad dyeing solution, pre-baked and dried, then padded in fixing solution, enters the steaming box to steam and fix the color, washed and soaped, dried, and finally dropped. The cloth rack is introduced into the cloth stacking car.
The temperature and time of steaming and baking are mainly determined by the reaction performance and diffusion performance of the dye.
AAAWQ32RDRGFJ

Extendedreading:https://www.brandfabric.net/polyester-dobby-3-laminated-fabric/
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedread

This article is from the Internet, does not represent 【www.buyfabric.net】 position, reproduced please specify the source.https://www.buyfabric.net/archives/40973

Author: clsrich

 
TOP
Home
News
Product
Application
Search