Many people like gorgeously decorated mosquito nets, but when they think about the need for mosquito net brackets to set up such mosquito nets, If you feel a headache, don’t worry. If you want to know how to set up a mosquito net, you must first know what types of mosquito net brackets there are. Take a look at the editor’s summary! Here are also steps on how to DIY a mosquito net bracket, come and learn new skills!
Mosquito net bracket
1. What are the types of mosquito net brackets
1. Hanging mosquito net bracket
It is composed of tee corners, connectors, pipe sections, and live screws connected into horizontal and vertical support frames. After installation at home, a base can be installed at the bottom of the vertical support frame. , when used in the field, the bottom ends of the four vertical support frames can be buried in the ground to increase its stability.
2. Guide rail mosquito net bracket
Including a guide rail equipped with hanging mosquito nets and a ball plate. The guide rail is in a “U” shape. There are two inner and outer guide grooves on the guide rail. The cross-section of the inner and outer guide grooves is ” C” type. The rail-type mosquito net frame installs the drawstrings on the left and right sides of the mosquito net frame, so that each drawstring controls half of the mosquito net, effectively solving the shortcoming of the old product that feels too heavy when used.
Guide-rail mosquito net bracket
3. Center pull-type fully Telescopic mosquito net bracket
The mosquito net bracket includes a mosquito net bracket, a mosquito net hanging rod and a movable rod, and is characterized in that the mosquito net is There is a ring in the center of the front and rear crossbars and the center of the movable rod of the bracket respectively. One end of a pull rope is connected to the ring of the movable rod, and the other end goes around the ring of the front crossbar and then passes through the movable rod and the movable rod. The ring of the rear cross bar hangs down for a certain length and then passes through the ring of the rear cross bar to be connected with the ring of the movable rod.
2. How to DIY a mosquito net bracket
1. Straighten all the poles tied with rubber bands, and then take out the two longest ones. The two longest ones are the length of the bottom of the mosquito net. Then take out two more poles that are longer than this. The two shorter ones are used as the top of the mosquito net.
2. Find four tall poles that are almost the same length and make mosquito nets.
3. Of the remaining four, two are longer and two are shorter. The two longer ones are at the bottom of the mosquito net. The width is the width of the top, and the two shorter ones are the width of the top.
4. A set of mosquito nets has eight tees, which are used to connect poles, that is, eight knots. The four knots on top each have four openings, and the small openings on top are for placing decorations.
How to DIY a mosquito net bracket
5. On the four corners of the top of the tent There are four small holes left through which the decoration can be inserted into the small opening of the tee. It should be noted that the mosquito nets have a large bottom and a small top so that they can stand firmly, and then the installation is over.
Editor’s reminder: If the bracket is used for a long time, it is recommended to use stainless steel, iron is easy to rust , plastic ones are not durable; if the bracket is for short-term use, it is much simpler, whichever one is cheaper should be used.
The above is the relevant content about the types of mosquito net brackets that the editor has compiled for you. I hope it will be helpful to you. If you want to know more about mosquito nets, please continue to pay attention. Get a quotation in 10 seconds and get four sets of design plans*, as well as full tracking service by a decoration butler, so act quickly!
