Dust removal material PTFE air filter membrane is made of polytetrafluoroethylene (PTFE) material through special processes such as mixing, extrusion, extrusion, calendering, and biaxial stretching.
The dust layer formed by filtration is easy to split, and the filter material has good air permeability.
Since the coated filter material relies on a thin film to capture dust particles, the dust layer can only be formed on the outside of the filter material film. The film is hydrophobic, and the adhesion between the dust layer and the filter material is small, making it easy to separate without external force. Under the influence, it can fall off by its own weight.
If it is under the action of back blowing air, it can be completely eliminated. If an antistatic polytetrafluoroethylene film is used, the dust will be easier to peel off and the dust will be cleaned more thoroughly.
Due to the good air permeability of the filter material, the pressure difference is reduced, the power consumption of the fan is reduced, the service life of the filter material is extended, the startup rate is increased, the dust removal workload is reduced, and the number of production shutdowns is reduced.
?1. Compared with other high-efficiency filtration materials, the PTFE air filter membrane produced by our company has good filtration performance.
?2.?The PTFE air filter membrane material is highly hydrophobic and has good non-adhesion. It is easy to remove dust accumulated on the surface of the material. It can be washed with water to restore its performance, achieve reuse and extend its service life.
?3. The membrane pore size is small, and the material has been heat-set at high temperatures, resulting in a stable microporous structure, so it can effectively intercept dust particles at high wind speeds.
Engaged in technology development, transfer, consulting, and services in the field of new materials; R&D, production, sales, and customization; and provider of high-efficiency separation and filter material design solutions.
The PTFE air filter membranes produced are all imported raw materials, with a full set of advanced production equipment, an advanced clean room and an independent composite slitting workshop, ensuring the production quality of the PTFE membrane; using American Imported production testing instruments are used to test the quality of PTFE membranes, and they have also passed international SGS testing and certification, as well as ISI testing and certification.
</p