Polytetrafluoroethylene is a linear crystalline thermoplastic with a white waxy feel similar to polyethylene. The surface feels smooth and its products are transparent or opaque.
We are a manufacturer specializing in the production of PTFE air filtration membranes. The membranes we produce have the following performance advantages: 1. Good recoverability. The membrane is hydrophobic, which means that moisture cannot penetrate into the deep layers of the filter bag, which can This allows the filter bag to adapt to high humidity conditions and achieve high dust removal effects.
Because the film intercepts dust on the surface, the wet powder cake will not adhere to the fibers of the felt.
And when the temperature rises, the dry powder is more easily removed from the smooth film.
2. Able to increase production capacity. For any filtration system with insufficient production capacity, as long as the PTFE air filter membrane-coated filter bag is installed, and the dust collector system does not make any major changes, an additional percent increase can be achieved. Ten to fifteen percent air volume.
This is because every time you clean the dust, it will be cleaned very clean, and there will be less dust remaining on the surface of the filter bag.
3. Ultra-low emissions. For particles with a diameter of 0.3um, the film can achieve an interception rate of 99.995%.
Using such membrane filter bags to intercept dust generated during production can undoubtedly achieve ultra-low emissions, fully complying with current environmental protection emission standards.
4. Extend the service life of the filter bag. The ptfe air filter membrane can effectively prevent dust from penetrating into the deep layers of the filter material and eliminate the wear caused by dust entering the inside of the filter bag. This can ensure that the base material is always in a clean state, thereby extending the life of the filter bag. Improves the mechanical life of the filter bag.
In addition, because the film has a smooth surface, only a very low pulse pressure is required to achieve the purpose of dust cleaning, thus greatly reducing the mechanical damage to the filter bag by the compressed air during dust cleaning, thus ensuring the filter bag’s durability. The service life can be extended.
</p
