September has arrived before we know it, and the autumn wind brings coolness but also coolness.
It is said that when there are autumn rains and cold weather, after several autumn rains, we should prepare masks.
So are your masks ready? ptfe mask film is always by your side.
The fiber diameter of the ordinary non-woven material used in our traditional masks is more than 1000 nanometers, while the fiber diameter of the ptfe mask membrane is between 100 and 200 nanometers, which is much smaller than the above diameter, so it can It is very effective in blocking PM2.5 in the air, as well as some viruses, bacteria and particles that are invisible to the human eye.
Polytetrafluoroethylene has a strong application background in traditional industrial fields and is often used as a purification material. One of the reasons is that it is washable and has low moisture absorption.
This attribute allows 98% of the moisture generated by human breathing to be smoothly discharged from the mask when using the mask, achieving an efficient moisture permeability effect.
It is a high-tech enterprise specializing in the research and development, production and sales of polytetrafluoroethylene microporous membranes. The ptfe mask membrane products we produce are all produced from imported raw materials, with finer molecular weight, cleaner and better uniformity. .
The dust removal efficiency can reach over 99.9995%.
The minimum pore size of the film can reach 0.1um, which can capture most solid particles and liquid droplets. Moreover, polytetrafluoroethylene is a hydrophobic material and water droplets cannot penetrate the micropores, so it has good moisture permeability, air permeability and waterproof properties.
We have a full set of advanced production equipment and testing instruments, as well as a complete pre-sales, sales and after-sales service system.
</p
