Japanese Ro reverse osmosis support cloth refers to a fiber mesh made by dehydrating water, fiber and chemical additives in a special former, and then undergoes physical or chemical processing to obtain the appearance and appearance of cloth. Nonwovens with certain properties.
The exact name of Japan’s Ro reverse osmosis support fabric should be “non-woven fabric”, or “non-woven fabric”.
Because it is a fabric that does not require spinning or weaving. It just orients or randomly arranges short textile fibers or filaments to form a fiber mesh structure, and then uses mechanical, thermal bonding or chemical methods to reinforce it. Become.
Mainly used in construction, the roof waterproofing is used as the base fabric, with sand, cement, etc. attached to it to prevent sand from leaking.
Non-woven fabrics are often used in construction as a measure to prevent cracks.
The production speed of imported wet-laid non-woven fabrics is high, which can reach 400m/min. It is suitable for short fibers with a length of less than 20mm. The woven materials are almost isotropic; the product has good fluffiness and fiber web uniformity; the production cost is low; the possibility of changing the variety of wet-laid nonwoven materials is small; and the water consumption is large.
Japanese Ro reverse osmosis support cloth has a very special physical property: resistance to gamma rays.
In other words, if it is applied to medical products, it can be directly sterilized with gamma rays without destroying its physical properties and dimensional stability. This is a physical property that polypropylene (PP) spunbond non-woven fabrics do not have.
Interested parties can enter the store to inquire and purchase.
</p
