Three-layer and five-layer composite materials refer to the PTFE film that is compounded on various substrates using a special process. The company is a manufacturer specializing in the research, development and production of composite materials.
The molding methods of three-layer and five-layer composite materials vary according to the base material.
There are many molding methods for resin-based composite materials, including hand lay-up molding, injection molding, fiber winding molding, compression molding, pultrusion molding, RTM molding, autoclave molding, diaphragm molding, migration molding, reaction injection molding, Soft film expansion molding, stamping molding, etc.
Metal matrix composite molding methods are divided into solid phase molding method and liquid phase molding method.
The former is formed by applying pressure at a temperature lower than the melting point of the matrix, including diffusion welding, powder metallurgy, hot rolling, hot drawing, hot isostatic pressing and explosion welding.
The latter is to melt the matrix and then fill it into the reinforcement material, including traditional casting, vacuum suction casting, vacuum back pressure casting, squeeze casting and spray casting. The main molding methods of ceramic matrix composite materials include solid phase Sintering, chemical vapor infiltration molding, chemical vapor deposition molding, etc.
? A high-tech enterprise focusing on the research, development and production of fluorine material film technology. Our membrane materials are all imported raw materials, with a full set of domestic advanced production equipment and advanced production technology. Our products have passed ISO9001 quality management system certification. The testing standards strictly follow the EU standard EN1822, and the membrane products are tested using the MPPS method.
If you are interested, please enter the store to discuss.
</p
