Particle pollutants (PM) are a global problem, which seriously endanger people’s penetration of cheek pouches and have attracted widespread attention.
There are two traditional methods for filtering particulate matter: one is porous filter membrane and the other is fiber.
Today we are going to talk about ptfe air filter membrane.
The function of the air filter is to filter out particulate impurities in the air. It is installed in the air intake duct and at the front end of the air flow meter. When the engine is working, it needs to inhale a large amount of outside air. Through the filtration of the air filter, the “inhalable particles” in the air are removed. “Filter out, enter the (intake duct or) cylinder and mix with fuel for combustion. If the air filter element cannot perform its proper filtering function, the larger particles in the air will enter the engine and be burned, which will cause various kinds of combustion over time. Such “failures”, such as carbon deposits, engine wear, etc. that are often mentioned! The filtration efficiency of ptfe air filter membrane for bacteria and PM2.5 particles in the air can reach more than 95%, with extremely high porosity and <5μm The ultra-thin thickness makes it have better breathability, small breathing resistance and comfortable wearing.
In addition, the filter membrane is naturally hydrophobic, and the filtration mechanism is physical and mechanical interception. The interception rate will not be attenuated due to moisture in the exhaled breath.
The temperature resistance range is -195℃～250℃, and the long-term use temperature is -100℃～250℃.
The ptfe air filter membrane produced by the manufacturer uses imported raw materials, has a full set of advanced production equipment, an advanced clean room and an independent composite slitting workshop to ensure the production quality of ptfe membrane. Interested parties You can contact us by entering the store.
</p
