The quilt cover we sleep on every day needs to be changed and washed frequently, because if the quilt cover and bedding are not changed and washed frequently, bacteria and mites will easily breed. During the changing and washing process, , the first thing we have to do is to take out the bedding inside, and the zipper of the quilt cover will easily fall off or be damaged after being used for a long time. So what should I do if the zipper of the quilt cover is broken? Today I will teach you some solutions.
1. How to install the quilt cover if its zipper has fallen off
1. First, find the installation direction. There is a small bump on the zipper, pointing upward. Don’t mistake it, otherwise the zipper will not be smooth when installed.
2. Put the narrow end of the zipper head downwards and the thick end upwards, insert the zipper teeth, pull down, and pull the zipper head. Basically flush with the zipper, until it can’t be pulled any further.
3. Grasp the edge of the fabric with both hands, separate the zipper teeth with a little force, then pull the zipper head, and the zipper head will be installed. .
4. Prepare a vise and pull out the excess teeth.
5. Prepare a needle-nose pliers.
6. Use needle-nose pliers to cover the U-shaped code on the edge of the fabric, and then clamp it so that the U-shaped code is fixed on the edge of the fabric and the zipper When the head is pulled upward, it will not fall down.
7. Use a vise to remove the excess teeth at the end of the zipper and prepare an I-shaped code.
8. Use a vise to clamp the I-shaped code and fix it on the edge of the fabric, so that the tail end of the zipper is fixed.
9. Choose the pull tab you like and insert it into the small hook on the zipper head (it needs to be reminded that some pull tabs have The ring is relatively small, then a small ring is needed to connect the lower zipper head and pull tab), and then clamp it with pliers. If you want to change the pull tab, use pliers to open the small hook on it, and you can change the pull head. You can also use lace scissors to cut out beautiful saw teeth, which will be exactly the same as the finished zipper you bought. The advantage over the finished zipper is that you can make it as long as you want, and it will completely fit the size of the bag.
2. What to do if the zipper of the quilt cover is broken ( Related recommendations: How to repair the broken zipper)
1. Candle lubrication method
You can use soap or a candle to repeatedly pull on the zipper several times to solve the problem of being unable to pull or getting stuck.
2. Pliers clamping method
If the slider has two pieces This is caused by the distance between the iron pieces being stretched or the left and right being stretched wide. Just use pliers to clamp it up and down or left and right, and try again to see if it can be pulled together. Repeat several times until it is suitable. Be careful not to clamp it too tightly at one time to avoid being unable to pull; after repairing, it is better to apply candle on it several times.
3. Skillful sewing techniques with sewing needles
If the zipper is used for a long time, the iron pieces on both sides will fall off, affecting its use.
1. You can fold one end of a staple inward so that it is parallel to the iron rod, and fold the other end straight. According to Cut off the excess part of the book staple from the straight end of the zipper iron piece.
2. The book after cutting Nail, place it on the position of the original iron piece, put the folded end underneath, flush with the bottom edge of the zipper, and the other end to the same point as the teeth.
3. Then, use a sewing needle to sew back and forth twice densely with buttonhole stitches, and wrap the staples in the thread.
3. How to sew a quilt cover zipper
1. How to sew a quilt cover zipper
(1) Remove the broken zipper. Note: Cut the thread that fixes the zipper, and then remove it side by side to avoid removing it directly. Remove the quilt and zipper interface.
(2). Measure the length of the removed zipper, buy one of the same length, and place the newly purchased zipper away from the quilt.Align one end of the zipper opening on the zipper.
(3). Use a needle to stitch the stitches. Remember to zip up the zipper when ordering. Order one end first. After ordering, Unzip the other end.
(4). If you are good at it, you can order it by yourself. It can be used after ordering, but most of it will not look good. If you want to save time and effort, just Take the quilt to a zipper exchange place in the market, and the labor cost is only two or three yuan.
2. There are several ways to zipper a quilt cover
The zipper must be from the car. There are two types of zippers, one is a flat zipper and the other is an invisible zipper. If the waist is not very thick, it is recommended to use the invisible zipper, which looks better. The zipper method is : The top fabric is applied first, then the lining fabric, or several layers can be applied at the same time, depending on the style.
3. How to make an invisible zipper
Invisible form is an easy and quick way to assemble a zipper, because there is no need to falsely edit the thread and stitch the thread from the front. Using the invisible zipper foot, it can thread the thread as close as possible to the zipper teeth, so as to achieve the best view from the front. It looks like the zipper “disappears” into the garment. Install this kind of zipper before sewing the garment parts. Unzip the zipper before installing the zipper. Use a low-temperature iron to iron the zipper teeth as flat as possible. Do not close the zipper when installing the zipper. There are two types of presser feet available for installing invisible zippers, one is a single-sided presser foot, and the other is a slotted presser foot. Pay attention to the position when installing the presser foot. The single-sided presser foot keeps the needle against the edge of the presser foot. Use a slotted presser foot. When pressing the presser foot, align the needle with the gap in the middle of the presser foot so that the zipper teeth run under the groove. When assembling the zipper, install the zipper on the left first, from the top to the bottom, to the end of the zipper, and then from the bottom, attach the zipper on the other side, paying attention to the same height. When sewing the zipper, the stitches should be as close as possible to the zipper teeth, and the stitches should be as close as possible to the appropriate position. position, and then complete the collection of clothing pieces. Remember to do this so that the zipper will sew smoothly to the garment without leaving a gap. It is recommended to start the stitching as close to the end of the zipper as possible and then sew the gap by hand, or sew it completely with a machine, or use a zipper foot to achieve as closed a result as possible.
4. How to make a flat zipper
(1) Choose the right zippers Make the quilt cover fabric, cut it to the size you want, take a 43cm long zipper, fold the side of the fabric inward to equal the width of the zipper, attach the zipper face down to the folded side and sew. When sewing, be sure to leave 10cm at the beginning and end.
(2) After the car is ready, open the other half of the zipper
(3). Align the 47cm side of the other side with the side where the half zipper has been sewn neatly. Place the broken half zipper on the other side and compare it with the *net (the front side of the zipper is attached cloth, lock teeth facing outward)
(4). After comparison, sew
(5) Align the upper zipper head with both sides.
(6) After attaching the zipper head, pull up the zipper and close the two pieces of cloth at the end of the zipper as shown in the figure.
(7). Press the zipper tail back and forth to prevent the slider from derailing.
The above is about how to install the quilt cover if the zipper has fallen off, what to do if the quilt cover zipper is brokenRelated content, I hope it can be helpful to everyone! , China’s well-known large-scale decoration platform and leading decoration brand. If you want to put some thought into decoration and design, it is recommended that you apply for professional design services. Professional designers can help you plan a reasonable space layout and exquisite design through on-site room measurement.
>> Click here to get professional designer* room design
